Nonetheless, asphalt paving costs between $3 and $5 per square foot. Assuming your hire a pro, the total cost to install an asphalt driveway typically ranges between $3,000 and $7,000, with an average around $6,400.
What do paving contractors do?
A paving contractor is a company that constructs paved surfaces such as roads, sidewalks, concrete floors. Most paving work is performed using large pieces of equipment. A paving contractor may use a paving machine to smooth out a freshly laid road surface, or an excavator to prepare the earth for paving. Nov 5, 2010
What is the difference between asphalt and blacktop?
Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. Blacktop has the same ingredients, but the mixture is different. Blacktop has a higher mixture of stone than asphalt.
What should I look for in asphalt driveway?
What makes a good asphalt driveway? Adequate foundation. Preparing an adequate foundation includes having a solid subgrade and building a strong aggregate base. Proper drainage. Another key point is proper drainage. Appropriate materials. It is important to use the right asphalt mix. Maintenance.
Which lasts longer concrete or asphalt?
Concrete lasts longer, but asphalt driveways are less expensive to install. Asphalt needs more maintenance, but is generally easier to repair. In winter, concrete driveways can suffer damage if you use the wrong de-icing product.
Are there different grades of blacktop?
There are three different grades available in asphalt. The grades available are I-2, also known as base; I-5, known as top ;and the I-4 or commercial top grades. The difference in the tree grades are that the I-2 or base consists of ¾ inches of stone. The base grade is generally used in corn stabilizing level.
Should you seal asphalt driveway?
As a general rule you should seal your driveway every 1 to 3 years. More specifically, if you can see the color of the individual stones that make up your asphalt surface, you know it’s time to seal it up. Ideally you want your sealer to be on your driveway for at least 48 hours before any rain comes down on it.
What temperature should asphalt be laid?
Mix Temperature When it arrives at the job site, hot-mix asphalt is normally between 275 and 300 degrees Fahrenheit. For the initial rolling, the temperature of the mix needs to be between 220 and 290 degrees Fahrenheit.
What is the best base for a driveway?
A good crushed gravel base beneath the blacktop is the secret to a long-lasting driveway. The base is the foundation for a durable driveway, making it critical to pick the right base material. Installing crushed, granular based gravel on a compacted subgrade is the best start to a strong base.